SAT Automatic Revolving Door Systems
Give the entrance a defined architectural centre with SAT revolving door systems. Rotating wings move within a circular enclosure to form successive passage compartments. Three- and four-wing, glass-focused and combination layouts are selected according to the model, building use and circulation requirements.
A configuration for each entrance concept
Choose the model family before specifying dimensions and accessories. Glazing, controls, sensors and emergency arrangements are coordinated with the selected door and approved project drawings.
SRA3000
An automatic revolving door with three- or four-wing configurations. Framed glazing and coordinated finishes support a defined architectural entrance.
SRA3000G
A glass-focused revolving configuration for entrances where transparency and visual continuity are central to the design.
SRA3000GR
A revolving configuration with a glazed roof, extending the transparent entrance concept above the door wings.
SRM2000
A two-wing multi-function revolving entrance family. The central passage and operating arrangement are coordinated for the selected configuration.
SRM4000
A centre-showcase revolving entrance family, combining pedestrian circulation with an integrated display concept.
SRM5000MULTI / MAX
Advanced multi-function revolving entrance systems. Central passage, display arrangement and operating functions are specified for the chosen MULTI or MAX configuration.
Controls, safety and project options
Activation, protective sensing, emergency-stop controls and any reduced-speed function are defined in the equipment schedule for the selected model. Breakout arrangements, night closing, locking and air-curtain integration are reviewed as model-specific options.
The SAT revolving range follows the catalogue sequence: SRA3000, SRA3000G, SRA3000GR, SRM2000, SRM4000 and SRM5000MULTI / MAX. The final equipment schedule identifies the selected operating mode, included equipment and optional features.
What to establish before selection
- Available diameter, structural opening and canopy conditions
- Expected traffic and preferred wing arrangement
- Approach routes and any adjacent accessible entrance strategy
- Glazing, frame finish and architectural integration
- Safety devices, control interfaces and emergency requirements
- Installation constraints, power and service access
Final dimensions, operating features and documentation are confirmed for the specific model and approved project drawings.
SAT SRA3000 · Technical overview
| Parameter | Catalogue configuration |
|---|---|
| Electrical supply | 115 / 230 V · 50 / 60 Hz |
| Motor protection rating | IP55 |
| Control-panel protection rating | IP22 |
| Ambient temperature | −40°C to +60°C |
| Emergency-stop buttons | One at entry and one at exit |
| Reduced-speed passage buttons | One at entry and one at exit |
| Hand / finger safety strips | Standard at entry and exit |
| Standard operating panel | Three-position switch with microprocessor control |
| Optional user interface | 4-inch touchscreen |
| Standard switch modes | Automatic · Manual · Off |
SRA3000 is available in three- and four-wing configurations with selectable glazing, finishes, lighting and controls. Equipment and options vary across the SAT revolving range.
For more information, contact our technical support team.
Our team can assist with system selection, project options and the technical information relevant to your entrance.
Contact technical support