Automatic Door Operators, Sensors & Access Control
Connect door movement, activation and access management in one coordinated specification. Operators drive the leaves, activation devices request opening, protective sensors monitor relevant hazard areas, and compatible access-control interfaces manage authorised entry. Each component is selected for the door and its operating sequence.
Features and options
Operator selection
Drive and control equipment matched to the door type, leaf construction and intended use.
Operating modes
Automatic, hold-open and controlled-entry functions selected according to the compatible controller.
Activation
Approach sensors, push buttons or contactless intentional-opening devices chosen for the application.
Safety detection
Presence and protective sensing positioned around the threshold and relevant moving-door areas.
Access control
Compatible readers, entry signals and locking interfaces coordinated with the building system.
Power and service
Power supply, cabling, diagnostics, maintenance access and optional emergency provisions included in the equipment plan.
Available features and options depend on the selected system and project configuration.
One entrance, coordinated functions
Activation and safety perform different jobs and must be selected together. The controller, sensors, lock and access signals need compatible interfaces and a clear operating sequence. Reviewing these relationships early simplifies installation, commissioning and ongoing service.
SAT operator and accessory references
| Reference | Function and selection scope |
|---|---|
| EI-125 | Linear sliding-door operator platform |
| EI-125T | Telescopic sliding configuration |
| EI-125C | Curved and circular sliding configuration |
| SL-120 | Hinged swing-door operator |
| 505W | Contactless, intentional-opening activation switch |
| M-206E | Proximity-card and passcode access controller |
| M213M | Electromagnetic locking family; mounting and release strategy selected for the doorset |
Choose compatible activation, sensing, access-control and locking equipment for the entrance. Available accessories and interfaces depend on the selected operator and configuration.
SAT SO125 · Swing-gate opener
| Parameter | Operator reference |
|---|---|
| Application | Hinged perimeter gate; separate from pedestrian swing doors and boom barriers |
| Input supply | 110–240 V AC · 50 / 60 Hz |
| Motor voltage | 24 V DC |
| Power | 2 × 100 W |
| Actuator speed | 16 mm/s |
| Maximum actuator travel | 490 mm |
| Ambient temperature | −20°C to +50°C |
| Protection rating | IP44 |
A swing-gate automation solution for perimeter access. Select the actuator, controls and safety accessories around gate size, installation geometry and site use.
For more information, contact our technical support team.
Our team can assist with system selection, project options and the technical information relevant to your entrance.
Contact technical support