SAT EI-125T Automatic Telescopic Sliding Doors
Maximise the usable passage within a restricted frontage. Telescopic sliding doors use coordinated leaves on parallel tracks that overlap as they open, offering an alternative where conventional sliding layouts require more side space. The final opening depends on the panel arrangement and available stacking area.
Features and options
Configuration
Single-side or centre-opening layouts, selected around the clear passage and stacking space.
Movement
Coordinated sliding leaves guided along parallel tracks for a controlled opening and closing sequence.
Control
Electronic operation with opening behaviour and hold-open settings selected for the intended traffic pattern.
Activation and safety
Approach detection and doorway presence protection planned around the entrance geometry.
Glazing and finish
Glass, profiles and surface finishes coordinated with the façade and project specification.
Project options
Access-control interfaces, locking and emergency-opening arrangements reviewed for the selected system.
Available features and options depend on the selected system and project configuration.
More room for people, less demand on side space
The telescopic principle allows multiple leaves to gather beside the opening. It is particularly useful where a generous pedestrian passage is needed but the frontage offers limited parking space for conventional sliding leaves. The final layout balances usable passage, glazing proportions and the movement of people through the building.
SAT EI-125T · Telescopic configurations
| Parameter | One-direction opening · 2 moving leaves | Bi-parting opening · 4 moving leaves |
|---|---|---|
| Maximum moving-leaf masses | 120 kg + 120 kg | 60 kg + 60 kg + 60 kg + 60 kg |
| Maximum panel thickness | 60 mm | 60 mm |
| Electrical supply | 115 / 230 V AC · 50 / 60 Hz | 115 / 230 V AC · 50 / 60 Hz |
| Maximum power consumption | 100 W | 100 W |
| Drive unit | 24 V DC with encoder | 24 V DC with encoder |
| Operator protection rating | IP20 | IP20 |
| Partial-opening adjustment | 10–90% | 10–90% |
| Opening-delay setting | 0–90 s | 0–90 s |
| Night-mode delay setting | 0–240 s | 0–240 s |
Choose two moving leaves opening to one side or four leaves opening from the centre. Panel construction, glazing and controls are tailored to the selected EI-125T arrangement.
For more information, contact our technical support team.
Our team can assist with system selection, project options and the technical information relevant to your entrance.
Contact technical support